ZyXEL Communications WAP5805, Руководство пользователя

Страница: 51 / 125

Chapter 8 Wireless LAN
WAP5805 User’s Guide
51
8.5 AP Setup Screen
Use this screen to configure AP settings. Click Configuration > Network > Wireless LAN >
More AP to open the More AP Setup screen.
Figure 29
Configuration > Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Channel Selection Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the
frequency band and the country you are in.
This option is only available if Auto Channel Selection is disabled.
Auto Channel
Selection
Select the check box to have the WAP5805 automatically scan for and select a channel
which is not used by another device.
Operating
Channel This displays the channel the WAP5805 is currently using.
Channel Width Set the operating width of the channel depending on your particular region.
Select a channel width from the drop-down list box. The options are: Auto 20/40 MHz,
40 MHz, and 20MHz.
The default is Auto 20/40 MHz .
Security
Security Mode Select WPA2-PSK to enable data encryption.
WPA-PSK
Compatible This field appears when you choose WPA2-PSK as the Security Mode .
Check this field to allow wireless devices using WPA2-PSK security mode to connect to
your WAP5805.
Pre-Shared Key WPA2-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key
Update Timer The Group Key Update Timer is the rate at which the AP sends a new group key out to
all clients.
The default is 3600 seconds (60 minutes).
Apply Click Apply to save your changes back to the WAP5805.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 17
Configuration > Network > Wireless LAN > General: Security
LABEL DESCRIPTION
Table 18
Configuration > Network > Wireless LAN > More AP
LABEL DESCRIPTION
# This field is a sequential value and is not associated with a specific entry.
Status This field displays the status of the device: operating or not operating.