ZyXEL Communications Prestige 662HW Series, Руководство пользователя

Страница: 75 / 458

Prestige 662HW Series User’s Guide
Wireless LAN Setup 6-11
6.10 Security Parameters Summary
Refer to this table to see what other security parameters you should configure for each Authentication
Method/ key management protocol type. You enter manual keys by first selecting
64-bit WEP or
128-bit WEP from the WEP Encryption field and then typing the keys (in ASCII or hexadecimal
format) in the key text boxes. MAC address filters are not dependent on how you configure these
security features.
Table 6-3 Wireless Security Relational Matrix
AUTHENTICATION METHOD/
KEY MANAGEMENT
PROTOCOL
ENCRYPTION
METHOD
ENTER MANUAL
KEY
ENABLE IEEE 802.1X
Open None No No
No Enable with Dynamic WEP Key
Yes Enable without Dynamic WEP Key
Open WEP
Yes Disable
No Enable with Dynamic WEP Key
Yes Enable without Dynamic WEP Key
Shared WEP
Yes Disable
WPA WEP No Yes
WPA TKIP No Yes
WPA-PSK WEP Yes Yes
WPA-PSK TKIP Yes Yes
6.11 Wireless Client WPA Supplicants
A wireless client supplicant is the software that runs on an operating system instructing the wireless
client how to use WPA. At the time of writing, the most widely available supplicants are the
WPA
patch for Windows XP, Funk Software's Odyssey client, and Meetinghouse Data Communications'
AEGIS client.
The Windows XP patch is a free download that adds WPA capability to Windows XP's built-in "Zero
Configuration" wireless client. However, you must run Windows XP to use it.
6.12 Configuring 802.1x and WPA
To change your Prestige’s authentication settings, click the Wireless LAN link under Advanced
Setup and then the 802.1x/WPA tab.
The screen varies by the key management protocol
you select
.
You see the next screen when you select No Access Allowed or No Authentication Required in the
Wireless
Port Control field.