ZyXEL Communications Prestige 662HW Series, Руководство пользователя

Страница: 68 / 458

Prestige 662HW Series User’s Guide
6-4 Wireless LAN Setup
6.4 Configuring Wireless LAN
If you are configuring the Prestige from a computer connected
to the wireless LAN and you change the Prestige’s ESSID or WEP
settings, you will lose your wireless connection when you press
Apply to confirm. You must then change the wireless settings of
your computer to match the Prestige’s new settings.
Click Wireless LAN , Wireless to open the Wireless screen.
Figure 6-3 Wireless
The following table describes the fields in this screen.
Table 6-1 Wireless
LABEL DESCRIPTION
Enable Wireless
LAN The wireless LAN is turned off by default, before you enable the wireless LAN you should
configure some security by setting MAC filters and/or 802.1x security; otherwise your wireless
LAN will be vulnerable upon enabling it. Select the check box to enable the wireless LAN.
ESSID The ESSID (Extended Service Set Identification) is a unique name to identify the Prestige in
the wireless LAN. Wireless stations associating to the Prestige must have the same ESSID.
Enter a descriptive name (up to 32 characters).
Hide ESSID Select Yes to hide the ESSID in so a station cannot obtain the ESSID through passive
scanning.
Select
No to make the ESSID visible so a station can obtain the ESSID through passive
scanning.