ZyXEL Communications Prestige 662HW Series, Руководство пользователя

Страница: 383 / 458

Prestige 662HW Series User’s Guide
VPN/IPSec Setup 42-7
Table 42-2 Menu 27.1.1 IPSec Setup
FIELD DESCRIPTION EXAMPLE
Local Local IP addresses must be static and correspond to the remote IPSec
router’s configured remote IP addresses.
Two active SAs cannot have the local and remote IP address(es) both the
same. Two active SAs can have the same local or remote IP address, but not
both. You can configure multiple SAs between the same local and remote IP
addresses, as long as only one is active at any time.
Addr Type Press [SPACE BAR] to choose SINGLE , RANGE , or SUBNET and press
[ENTER]. Select SINGLE with a single IP address. Select RANGE for a
specific range of IP addresses. Select SUBNET to specify IP addresses on a
network by their subnet mask.
SINGLE
IP Addr Start When the Addr Type field is configured to Single , enter a static IP address
on the LAN behind your Prestige.
When the Addr Type field is configured to Range , enter the beginning (static)
IP address, in a range of computers on your LAN behind your Prestige.
When the Addr Type is configured to SUBNET , this is a (static) IP address on
the LAN behind your Prestige.
192.168.1.35
End/Subnet
Mask
When the Addr Type field is configured to Single , this field is N/A .
When the Addr Type field is configured to Range , enter the end (static) IP
address, in a range of computers on the LAN behind your Prestige.
When the Addr Type field is configured to SUBNET , this is a subnet mask on
the LAN behind your Prestige.
192.168.1.38
Port Start 0 is the default and signifies any port. Type a port number from 0 to 65535.
You cannot create a VPN tunnel if you try to connect using a port number that
does not match this port number or range of port numbers.
Some of the most common IP ports are: 21, FTP; 53, DNS; 23, Telnet; 80,
HTTP; 25, SMTP; 110, POP3
0
End Enter a port number in this field to define a port range. This port number must
be greater than that specified in the previous field. This field is N/A when 0 is
configured in the Port Start field.
N/A
Remote Remote IP addresses must be static and correspond to the remote IPSec
router’s configured local IP addresses. The remote fields are
N/A when the
Secure Gateway Address field is configured to 0.0.0.0.
Two active SAs cannot have the local and remote IP address(es) both the
same. Two active SAs can have the same local or remote IP address, but not
both. You can configure multiple SAs between the same local and remote IP
addresses, as long as only one is active at any time.
Addr Type Press [SPACE BAR] to choose SINGLE , RANGE , or SUBNET and press
[ENTER]. Select SINGLE with a single IP address. Use RANGE for a specific
range of IP addresses. Use SUBNET to specify IP addresses on a network by
their subnet mask.
SUBNET