ZyXEL Communications Prestige 662HW Series, Руководство пользователя

Страница: 38 / 458

Prestige 662HW Series User’s Guide
2-2 Introducing the Web Configurator
Figure 2-2 Change Password at Login
7.
You should now see the SITE MAP screen.
The Prestige automatically times out after five minutes of
inactivity. Simply log back into the Prestige if this happens to you.
2.3 Resetting the Prestige
If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the Prestige to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the password will be reset to “1234”.
2.3.1 Using The Reset Button
1.
Make sure the PWR/SYS LED is on (not blinking).
2.
Press the RESET button for ten seconds or until the PWR/SYS LED begins to blink and then
release it. When the PWR/SYS LED begins to blink, the defaults have been restored and the
Prestige restarts.
2.4 Navigating the Prestige Web Configurator
The following summarizes how to navigate the web configurator from the SITE MAP screen. We use
the Prestige 662HW-61 web screens in this guide as an example. Screens vary slightly for different
Prestige models.
♦ Click Wizard Setup to begin a series of screens to configure your Prestige for the first time.
♦ Click a link under Advanced Setup to configure advanced Prestige features.
♦ Click a link under Maintenance to see Prestige performance statistics, upload firmware and
back up, restore or upload a configuration file.
♦ Click Site Map to go to the Site Map screen.
♦ Click Logout in the navigation panel when you have finished a Prestige management session.