Prestige 662HW Series User’s Guide
Menu 3 LAN Setup
25-3
Table 25-1 DHCP Ethernet Setup
FIELD DESCRIPTION
EXAMPLE
Client IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the IP
address pool.
192.168.1.33
Size of Client IP Pool
This field specifies the size or count of the IP address pool.
32
Primary DNS Server
Secondary DNS Server
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet
mask.
Remote DHCP Server
If
Relay
is selected in the
DHCP
field above then enter the IP address
of the actual remote DHCP server here.
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Table 25-2 TCP/IP Ethernet Setup
FIELD DESCRIPTION
EXAMPLE
TCP/IP Setup
IP Address
Enter the (LAN) IP address of your Prestige in dotted decimal notation 192.168.1.1
IP Subnet Mask
Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
255.255.255.0
RIP Direction
Press [
SPACE BAR
] to select the RIP direction. Choices are
Both
,
In Only
,
Out Only
or
None
.
Both
(default)
Version
Press [
SPACE BAR]
to select the RIP version. Choices are
RIP-1
,
RIP-2B
or
RIP-2M
.
RIP-1
(default)
Multicast
IGMP (Internet Group Multicast Protocol) is a network-layer protocol
used to establish membership in a Multicast group. The Prestige
supports both IGMP version 1 (
IGMP-v1
) and version 2 (
IGMP-v2
).
Press the [
SPACE BAR]
to enable IP Multicasting or select
None
to
disable it.
None
(default)
IP Policies
Create policies using SMT menu 25 (see the
IP Policy Routing
chapter
) and apply them on the Prestige LAN interface here. You can
apply up to four IP Policy sets (from twelve) by entering their numbers
separated by commas.
2,4,7,9
Edit IP Alias
The Prestige supports three logical LAN interfaces via its single
physical Ethernet interface with the Prestige itself as the gateway for
each LAN network. Press [
SPACE BAR
] to change
No
to
Yes
and
press [
ENTER
] to display menu 3.2.1.
No
(default)
Содержание Prestige 662HW Series
