ZyXEL Communications Prestige 662HW Series, Руководство пользователя

Страница: 269 / 458

Prestige 662HW Series User’s Guide
Internet Access 27-3
Figure 27-4 Menu 3.2.1 IP Alias Setup
Follow the instructions in the following table to configure IP Alias parameters.
Table 27-1 Menu 3.2.1 IP Alias Setup
FIELD DESCRIPTION EXAMPLE
IP Alias Choose Yes to configure the LAN network for the Prestige. Yes
IP Address Enter the IP address of your Prestige in dotted decimal notation 192.168.2.1
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the Prestige
255.255.255.0
RIP Direction
Press [
SPACE BAR
] to select the RIP direction. Choices are None , Both ,
In Only or Out Only .
None
Version
Press [
SPACE BAR]
to select the RIP version. Choices are RIP-1 , RIP-2B
or RIP-2M .
RIP-1
Incoming
Protocol Filters Enter the filter set(s) you wish to apply to the incoming traffic between this
node and the Prestige.
Outgoing
Protocol Filters Enter the filter set(s) you wish to apply to the outgoing traffic between this
node and the Prestige.
When you have completed this menu, press [
ENTER
] at the prompt “Press ENTER to Confirm…” to save your
configuration, or press [
ESC
] at any time to cancel.
27.5 Route IP Setup
The first step is to enable the IP routing in Menu 1 — General Setup .
To edit menu 1, type 1 in the main menu and press [ ENTER ]. Set the Route IP field to Yes by
pressing [ SPACE BAR ].
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A