Prestige 645M-A1 ADSL Bridge
Prestige and renames it “rom-0”. Likewise “get rom-0 config.rom” transfers the configuration
file on the Prestige to your computer and renames it “config.rom.” See earlier in this chapter for
more information on filename conventions.
Step 7.
Enter “quit” to exit the ftp prompt.
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
Figure 7-8 FTP Session Example
More commands that you may find in third party FTP clients, are listed earlier in this chapter.
FTP over WAN will not work if you have applied a filter in menu 11.1 (WAN) to block Telnet service.
7.4.4 TFTP File Upload
The Prestige also supports the up/downloading of the firmware and the configuration file using TFTP
(Trivial File Transfer Protocol) over LAN. Although TFTP should work over WAN as well, it is not
recommended.
To use TFTP, your computer must have both telnet and TFTP clients. To transfer the firmware and the
configuration file, follow the procedure shown next:
Step 1.
Use telnet from your computer to connect to the Prestige and log in. Because TFTP does not
have any security checks, the Prestige records the IP address of the telnet client and accepts
TFTP requests only from this address.
Step 2.
Put the SMT in command interpreter (CI) mode by entering 8 in
Menu 24 – System
Maintenance
.
7-10
Configuration and Firmware File Maintenance