Prestige 645M-A1 ADSL Bridge
3-8
Internet Access
Table 3-3 Internet Access Setup
FIELD DESCRIPTION
EXAMPLE
ISP’s Name
Enter the name of your Internet Service Provider, e.g.,
MyISP. This information is for identification purposes only.
MyISP
Encapsulation
Press the [SPACE BAR] to select the method of
encapsulation used by your ISP. The choices are PPP or
RFC 1483.
PPP
Multiplexing
Press the [SPACE BAR] to select the method of
multiplexing used by your ISP - either VC-based or LLC-
based.
VC-based
VPI #
Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
8
(default)
VCI #
Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.
35
(default)
ATM QoS Type
Press [SPACE BAR] and select
CBR
(Continuous Bit Rate)
to specify fixed (always-on) bandwidth. Select
UBR
(Unspecified Bit Rate) for applications that are non-time
sensitive, such as e-mail. Select
VBR
(Variable Bit Rate) for
bursty traffic and bandwidth sharing with other applications.
UBR
Peak Cell Rate (PCR) This is the maximum rate at which the sender can send
cells. Type the PCR.
0
Sustain Cell Rate (SCR) Sustained Cell Rate is the mean cell rate of a bursty, on-off
traffic source that can be sent at the peak rate, and a
parameter for burst-type traffic. Type the SCR; it must be
less than the PCR.
0
Maximum Burst Size
(MBS)
Refers to the maximum number of cells that can be sent at
the peak rate. Type the MBS. The MBS must be less than
65535.
0
My Login
Enter the login name that your ISP gives you.
tarbuck
My Password
Enter the password associated with the login name above.
***
At this point, if all your settings are correct your Prestige should connect automatically to the Internet.