Prestige 645M-A1 ADSL Bridge
4-4
Remote
Node
Configuration
Table 4-1 Remote Node Profile
FIELD DESCRIPTION
EXAMPLE
Outgoing:
My Login
Type the login name assigned by your ISP when the Prestige
calls this remote node.
My Password Type the password assigned by your ISP when the Prestige
calls this remote node.
This field sets the authentication protocol used for outgoing
calls. Options for this field are:
CHAP
/
PAP
– Your Prestige will accept either
CHAP
or
PAP
when requested by this remote node.
CHAP
– accept
CHAP
(Challenge Handshake Authentication
Protocol) only.
Authen
PAP
– accept PAP (Password Authentication Protocol) only.
PAP
Bridge
Ethernet
Addr.
Timeout (min)
In this field, enter the time (number of minutes) that you wish
your Prestige 645M to retain the Ethernet Addr information in its
internal tables while the line is down. If this information is
retained, your Prestige 645M will not have to recompile the
tables when the line is brought back up.
0
VPI # Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
8
VCI # Enter the Virtual Path Channel (VCI) that the telephone
company gives you.
35
ATM QoS Type
Press [SPACE BAR] and select
CBR
(Continuous Bit Rate) to
specify fixed (always-on) bandwidth. Select
UBR
(Unspecified
Bit Rate) for applications that are non-time sensitive, such as e-
mail. Select
VBR
(Variable Bit Rate) for bursty traffic and
bandwidth sharing with other applications.
UBR
Peak Cell Rate (PCR) This is the maximum rate at which the sender can send cells.
Type the PCR.
0
Sustain Cell Rate
(SCR)
Sustained Cell Rate is the mean cell rate of a bursty, on-off
traffic source that can be sent at the peak rate, and a parameter
for burst-type traffic. Type the SCR; it must be less than the
PCR.
0