Prestige 645M-A1 ADSL Bridge
Scene 2. One VC, One Protocol (IP)
Selecting
RFC-1483
encapsulation with VC-based multiplexing requires the least amount of overhead (0
octets). However, if there is a potential need for multiple protocol support in the future, it may be safer to
select
PPPoA
encapsulation instead of
RFC-1483
, so you don’t need to reconfigure when the time comes.
Scene 3. Multiple VCs
If you have an equal number (or more) of VCs than the number of protocols, then select
RFC-1483
encapsulation and
VC-based
multiplexing.
4.2.2 Remote Node Profile
To configure a remote node, follow these steps:
Step 1.
From the main menu, enter 11 to open
Menu
11 - Remote Node Setup
.
Step 2.
When menu 11 appears, as shown below, enter the number of the remote node that you wish to
configure.
Menu 11 - Remote Node Setup
1. MyISP (ISP)
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter Node # to Edit:
Figure 4-1 Remote Node Setup
When
Menu 11.1 - Remote Node Profile
appears fill in the fields to define this remote profile.
Descriptions and information about configuring the fields is given in the table that follows.
4-2
Remote
Node
Configuration