Prestige 645M-A1 ADSL Bridge
Step 2.
From this menu, enter 4 to open
Menu 24.4 - System Maintenance - Diagnostic
.
Menu 24.4 - System Maintenance - Diagnostic
xDSL
1. Reset
xDSL
TCP/IP
12. Ping Host
System
21. Reboot System
22. Command Mode
Enter Menu Selection Number:
Host IP Address= N/A
Figure 6-9 System Maintenance - Diagnostic
The following table describes the diagnostic tests available in menu 24.4 for your Prestige and the
connections.
Table 6-4 System Maintenance - Diagnostic
FIELD
DESCRIPTION
Reset xDSL
This command re-initializes the xDSL link to the telephone company.
Ping Host
This diagnostic test pings the host, which determines the functionality of the TCP/IP
protocol on both systems and the links in between.
Reboot System
This option restarts the Prestige.
Command Mode
This option allows you to enter the command mode. This mode allows you to
diagnose and test your Prestige using a specified set of commands.
6.6 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. The CI can be
entered from the SMT by selecting
Menu 24.8
. Access is by Telnet.
6-10
System
Maintenance