Prestige 645M-A1 ADSL Bridge
2-2
Hardware
Installation & Initial Setup
Table 2-1 Front Panel LED Description
LED
COLOR STATUS
DESCRIPTION
LAN 100M Orange
On
The Prestige has a successful 100Mb Ethernet connection.
Blinking
The Prestige is receiving or sending data.
Off
No device is connected at 100Mb.
On
The Prestige is linked successfully to a DSLAM.
Blinking
The Prestige is initializing the DSL line.
ADSL Green
Off
The DSL link is down.
Blinking
The Prestige is receiving or sending data.
ACT Green
Off
The Prestige is ready but not sending or receiving data.
2.2 Rear Panel and Connections
The following figure shows the rear panel connectors of your Prestige.
Figure 2-2 Rear Panel Connections
2.2.1 DSL Port
Connect the Prestige directly to the wall jack using the included DSL cable. Connect a microfilter(s) between
the wall jack and your telephone(s). A microfilter acts as low-pass filter (voice transmission takes place in the
0 to 4KHz bandwidth) and is an optional purchase.