ZyXEL Communications MES-2110, Руководство пользователя

Страница: 96 / 184

Chapter 12 Bandwidth Control
MES-2110 User’s Guide
96
The following table describes the related labels in this screen.
Table 37 Configuration > Bandwidth Control
LABEL DESCRIPTION
Bandwidth Control Configuration
Port Number Use this to select a port number.
Mode
This shows the Ingress (incoming) or Egress (outgoing) mode.
Rate Level Select a rate range from the list. Options are: 64K~960K (64+), 1M~100M
(1M+), 110M~1000M (10M+).
Rate Limit Specify the maximum bandwidth allowed for the traffic flow on a port. The
unit changes depending on how you configure in the
Rate Level field. The
value you enter in this field must be within the rate level range.
Active Use this to enable or disable bandwidth control.
Undo Click this to restore your last saved settings.
Apply Click this to save your changes.
Bandwidth Control Status
Port
This is the port number.
Ingress Limit This is the ingress rate limit on the port.
Active
This shows whether bandwidth control for ingress traffic is enabled or
disabled on the port.
Egress Limit This is the egress rate limit on the port.
Active This shows whether bandwidth control for egress traffic is enabled or
disabled on the port.