ZyXEL Communications MES-2110, Руководство пользователя

Страница: 69 / 184

Chapter 9 802.1x
MES-2110 User’s Guide
69
Click Configuration > 802.1x > Port Configuration in the navigation panel to
display the screen as shown.
Figure 33 Configuration > Port Configuration
The following table describes the labels in this screen.
Table 16 Configuration > Port Configuration
LABEL DESCRIPTION
Port This field displays the port number.
Active Select this check box to permit 802.1x authentication on the Switch.
Note: You must first enable 802.1x authentication on the Switch
before configuring it on each port.
Guest VLAN You can configure this if you have enabled the guest VLAN feature in the
Configuration > Global Configuration screen
(see
Section 9.2 on
page 67
)
.
Select Enable then enter the number that identifies the Guest VLAN.
Make sure this is the Guest VLAN recognized in your network.
Clients belonging to the guest VLAN can access unprotected areas in your
network, such as the Internet.
Select Disable if you do not want to use this feature.
Reauthenticat
ion Specify if a subscriber has to periodically re-enter his or her username
and password to stay connected to the port.
Reauth-Period
(1-999999) Specify how often (in minutes) a client has to re-enter his or her
username and password to stay connected to the port.
Default is 3600 minutes (or 1 hour).
Undo Click this to restore your last saved settings.
Apply Click this to save your changes.