ZyXEL Communications MES-2110, Руководство пользователя

Страница: 85 / 184

Chapter 11 VLAN
MES-2110 User’s Guide
85
11.3 The VLAN Type Screen
Use this screen to select the VLAN type. Click Configuration > VLAN Menu >
VLAN Type to open the following screen.
Figure 38 Configuration > VLAN Menu > VLAN Type
The following table describes the labels in this screen.
11.4 The Port-Based VLAN Screen
Port-based VLANs are VLANs where the frame forwarding decision is based on the
destination MAC address and its associated port.
Port-based VLANs require allowed outgoing ports to be defined for each port.
Therefore, if you wish to allow two subscriber ports to talk to each other, for
example, between conference rooms in a hotel, you must define the egress (an
egress port is an outgoing port, that is, a port through which a data frame leaves)
for both ports.
Port-based VLANs are specific only to the Switch on which they were created.
Table 28 Configuration > VLAN Menu > VLAN Type
LABEL DESCRIPTION
VLAN Type Use this to set the Switch to Port-Based or Tag-Based(802.1q)
VLAN mode.
Undo Click this to restore your last saved settings.
Apply Click this to save your changes.