ZyXEL Communications MES-2110, Руководство пользователя

Страница: 94 / 184

Chapter 11 VLAN
MES-2110 User’s Guide
94
11.5.9 The Management VLAN Screen
Use this to configure the management VLAN. A port must belong to the
management VLAN if you want to access the Switch’s web configurator via that
port. Click
Configuration > VLAN Menu > Tag-Based > Management VLAN
to open the following screen.
Figure 44 Configuration > VLAN Menu > Tag-Based > Management VLAN
The following table describes the labels in this screen.
Add VLAN Configuration
VLAN ID
Enter a VLAN ID number from 1 to 4094.
Priority This is the priority you want to assign to the Tag-based VLAN.
Pri-Override Select Enable to ignore the priority level assigned to the
transmitted frames. Otherwise, select Disable .
Port 1-10 A Member port is a permanent member of this VLAN group.
An Untagging port strips off the 802.1Q tag from incoming and
outgoing frames. Use this to send untag frames to devices that do
no support the 802.1Q feature.
A Tagging port tags incoming and outgoing frames with this
VLAN group information.
A Non-member port does not participate in the VLAN group.
Page Up Click this to view the next page.
Page Down Click this to view the previous page.
Refresh Click this to refresh the screen.
Page... Set Enter a page number and click Set to go to that page.
Table 35 Configuration > VLAN Menu > Tag-Based > Tag-Based info.
LABEL DESCRIPTION
Table 36 Configuration > VLAN Menu > Tag-Based > Management VLAN
LABEL DESCRIPTION
Management VLAN This is the current management VLAN.
VLAN ID Enter an ID number from 1 to 4094. 1 is the default value. If you
change this, you will be disconnected from the web configurator
unless your current access belongs to the new VLAN.
Undo Click this to restore your last saved settings.
Apply Click this to save your changes.