ZyXEL Communications MES-2110, Руководство пользователя

Страница: 48 / 184

Chapter 5 System Details
MES-2110 User’s Guide
48
The following table describes the labels in this screen.
5.3 The Board Information Screen
Use this screen to view the hardware and firmware information. Click System
Details > Board Info. to open the following screen.
Figure 20 System Details > Board Info.
Table 6 System Details > System Info.
LABEL DESCRIPTION
Description This is the descriptive name of the Switch for identification
purposes.
Model Name This is the model name of the Switch.
Object ID An Object ID defines what trap the Switch should send an SNMP
Manager.
Up Time This shows how long the Switch has been turned on.
System Name Choose a descriptive name for identification purposes. This name
consists of up to 64 printable characters; spaces are allowed.
Contact Name Enter the name of the person in charge of this Switch. You can
use up to 32 printable ASCII characters; spaces are allowed.
Location Enter the geographic location of your Switch. You can use up to
32 printable ASCII characters; spaces are allowed.
DHCP Client This shows whether the DHCP client is Enabled or Disabled . If
DHCP is disabled, you must enter an IP address, subnet mask and
gateway in the following fields. Otherwise, a DHCP server will
assign this information to the Switch.
See Section 5.4 on page 49 for details about configuring the
DHCP client.
IP Address Enter the IP address of your Switch in dotted decimal notation for
example 192.168.1.1.
Subnet Mask Enter the IP subnet mask of your Switch in dotted decimal
notation for example 255.255.255.0.
Gateway Enter the IP address of the default outgoing gateway in dotted
decimal notation, for example 192.168.1.254.
Undo Click this to restore your last saved settings.
Apply Click this to save your changes.