ZyXEL Communications G-220 v3, Руководство пользователя

Страница: 71 / 125

ZyXEL G-220 v3 User’s Guide
Chapter 4 Wireless Station Mode Configuration 71
4.6 Security Settings in Windows Vista
When you use the G-220 v3 in Windows Vista, the procedure for setting up WPA, WPA2 and
802.1x security settings is different from that of other operating systems (other security types
are not affected).
The procedures for setting up WPA, WPA2 or 802.1x in Vista are the same. However, the
procedure differs depending on whether you use PEAP (Protected Extensible Authentication
Protocol) or TLS (Transport Layer Security) encryption. Consult your network administrator
if you are unsure which type of encryption to use.
See section Section 4.6.1 “Using PEAP in Vista” on page 71 to use PEAP, or see section
Section 4.6.2 “Using TLS in Vista” on page 72 to use TLS.
4.6.1 Using PEAP in Vista
Take the following steps to set up WPA, WPA2 or 802.1x security using PEAP in Windows
Vista.
1 Either select the AP to which you want to connect in the Site Survey screen (see Section
4.3 on page 54 ), or configure a profile in the normal way (see Section 4.4 on page 62 ).
2 In the WPA , WPA2 or 802.1x security screen (see Section 4.3.1.3 on page 58 and
Section 4.3.1.4 on page 59 ), select PEAP as the EAP Type . Note that the Login Name
and Password fields are greyed-out (not available).
3 Click Next .
4 In the Summary screen that appears, click Save .
5 A message similar to the following appears in the bottom-right of your screen. Click the
message.
Figure 43 Vista Security: Additional Information Required
6 The Enter Credentials screen displays. Enter your User name and Password for the
network to which you want to connect.