background image

EMG6765-Q10A User’s Guide

184

C

HAPTER

 26

Troubleshooting

26.1  Overview

This chapter offers some suggestions to solve problems you might encounter. The potential problems are 
divided into the following categories. 

Power, Hardware Connections, and LEDs

EMG6765-Q10A Access and Login

Internet Access

Resetting the EMG6765-Q10A to Its Factory Defaults

Wireless Connections

USB Device Problems

MoCA Network

26.2  Power, Hardware Connections, and LEDs

The EMG6765-Q10A does not turn on. None of the LEDs turn on.

1

Make sure you are using the power adaptor or cord included with the EMG6765-Q10A.

2

Make sure the power adaptor or cord is connected to the EMG6765-Q10A and plugged in to an 
appropriate power source. Make sure the power source is turned on.

3

Disconnect and re-connect the power adaptor or cord to the EMG6765-Q10A.

4

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

1

Make sure you understand the normal behavior of the LED. See 

Section 1.6 on page 15

.

2

Check the hardware connections. See the Quick Start Guide. 

3

Inspect your cables for damage. Contact the vendor to replace any damaged cables.

Содержание EMG6765-Q10A




























































































































































































































Отзывы: