ZyXEL Communications eircom D1000, Руководство пользователя

Страница: 111 / 226

109
eircom D10
00 modem User’s Guide
7
Static Route
7.1 Overview
The Device usually uses the default gateway to route outbound traffic from computers on the LAN
to the Internet. To have the Device send data to devices not reachable through the default gateway,
use static routes.
For example, the next figure shows a computer ( A ) connected to the Device’s LAN interface. The
Device routes most traffic from A to the Internet through the Device’s default gateway ( R1 ). You
create one static route to connect to services offered by your ISP behind router R2 . You create
another static route to communicate with a separate network behind a router R3 connected to the
LAN.
Figure 73
Example of Static Routing Topology
A
R1
LAN
WAN
R3
R2
7.1.1 What You Can Do in the Static Route Screens
• Use the Static Route screens ( Section 7.2 on page 110 ) to view and configure IP static routes
on the Device.
• Use the IPv6 Static Route screens ( Section 7.3 on page 111 ) to view and configure IPv6 static
routes on the Device.