Zte ZXV10 T700, Руководство пользователя

Страница: 68 / 75

ZXV10 T700 User Guide
3. Press the Return key on the remote control. And then select OK to save the
configuration.
– End of Steps –
Follow-Up Action
After the auto shutdown, the terminal can be restarted by the following measures:
l
Press the key on the remote control for a few seconds.
l
Power off the terminal and power it on again.
After the auto standby, the terminal can be restarted by the following measures:
l
Press any key on the remote control.
l
Log in to the Web page.
l
Log in to the PC console.
l
Call the terminal.
l
Power off the terminal and power it on again.
7.5 Key Combinations of the Remote Control
Through a combination of keys on the remote control, you can enable a certain function
quickly.
Through combinations of the Disconnect , * , # , and the number keys, you can switch over
the main video output, perform the local loopback test, and restore the factory default
settings.
Main Video Output Switchover
Pressing the Keys
Continuously
Function
Disconnect - * - # - 0 - 1 - 0
Switches the main video output to HDMI, and the resolution is set to
720P@60.
Disconnect - * - # - 0 - 0 - 1
Switches the main video output to Component, and the resolution is
set to 720P@60.
Disconnect - * - # - 0 - 0 - 3
Switches the main video output to VGA, and the resolution is set to
1024x768@60.
Local Loopback Test
Pressing the Keys
Continuously
Function
Disconnect key- * - # - 1 - 0 Stops the local loopback test.
Disconnect key- * - # - 1 - 1 Starts the local loopback test.
7-4
SJ-20120112164919-002|2012-05-10 (R1.1) ZTE Proprietary and Confidential