Zte ZXV10 T700, Руководство пользователя

Страница: 16 / 75

ZXV10 T700 User Guide
2. (Optional) Select Call Option . In the dialog box that is displayed, set Type ,
Rate , and Password .
Note:
Only when the SIP working mode is IMS_SIP, Password is set.
3. Enter the required address in the Address text box by referring to the following
table and in accordance with the call type:
Type Call Address
H.323 Use one of the following:
à
Remote IP address
à Remote terminal number
SIP Use one of the following:
à Remote IP address
à
SIP user name (number) registered remotely
à Remote "number@domain name"
4. Press the Call key on the remote control to start the call.
Or select Call and press the OK key on the remote control to start the call.
l Make the call from the Call History screen.
1. Press the Menu or Call key on the remote control. The main menu screen is
displayed.
2. Select . The Call History screen is displayed.
3. Move the cursor to select the required address from the call history list.
4. Press the Call key on the remote control to call the selected address.
l
Make the call from the Address Book screen.
1. Press the Directory key on the remote control or select from the main
menu screen. The Call History screen is displayed.
2. Select the required address.
3. Press the Call key on the remote control to call the selected address.
– End of Steps –
Result
l If the call is successful, the two terminals communicate with each other.
l
If the call fails, the system displays a pop-up. After the fault is cleared, call again.
1-8
SJ-20120112164919-002|2012-05-10 (R1.1) ZTE Proprietary and Confidential