Zte ZXV10 T700, Руководство пользователя

Страница: 24 / 75

ZXV10 T700 User Guide
a. On the Web page, select System Control > Video Control . The Video Control
page is displayed.
b. Select Remote .
c. Click the up, down, left, and right direction buttons on to adjust the
camera to the required angle.
d. Click the - and + buttons under Zoom to zoom in or zoom out the image.
Click - and + buttons under Focus or Aperture to zoom in or zoom out the focus
or aperture of the camera, so as to obtain the required image.
l
Adjusting the camera through the PC console
a. On the General Control screen of the PC console, click the Switch to Remote
button in the Remote Video area so that the button changes to Switch to Local .
Note:
l If the current button shows Switch to Local , it indicates that the remote
camera is in control.
l
If the current button shows Switch to Remote , it indicates that the local
camera is in control. In this case, click it so that the button changes to Switch
to Local . Then, you can control the remote camera.
b. Click in the Remote Video area to zoom in or zoom out the image obtained
through the remote camera.
c. Click the up, down, left, right buttons on in the Remote Video area to
obtain the required angle.
– End of Steps –
2.2 Operating Screen Display
2.2.1 Adjusting Display Mode
l When the terminal is not in a call, the available display modes are GUI menu mode
and local video mode.
l When the terminal is in conference, the available display modes are determined by
the configuration of Video Output .
Three methods are introduced to adjust the display mode in this section.
2-4
SJ-20120112164919-002|2012-05-10 (R1.1) ZTE Proprietary and Confidential