Chapter 6 RIPng Configuration
Parameter
Description
[
only
]
Indicates that only the default route will be sent on the
interface.
6.3 RIPng Maintenance and Diagnosis
To maintain and diagnose RIPng, use the following commands.
Command
Function
ZXR10(config)#
show ipv6 rip
[
vrf
<
vrf-name
>]
Shows the content of the RIPng
protocol.
ZXR10(config)#
show ipv6 rip database
[{
X:X::X:X/
<
0-128
>|<
X:X::X:X
>}][
vrf
<
vrf-name
>]
Shows the RIP route database
information.
ZXR10(config)#
show ipv6 rip interface
[
vrf
<
vrf-name
>]<
interf
ace-name
>
Shows the interfaces on which
RIPng is enabled.
The command parameters are described as follows:
Parameter
Description
vrf
<
vrf-name
>
VRF name, with 1-32 characters
X:X::X:X
Indicates the specific IPv6 route prefix.
X:X::X:X/
<
0-128
>
Indicates the IPv6 route prefix and prefix length.
<
interface-name
>
Indicates the interface name.
The following example shows the outputs of the command
show ipv6 rip
:
ZXR10(config)#show ipv6 rip
RIPng protocol, port 521, multicast-group FF02::9
administrative distance is 120
default metric is 1
updates every 30 seconds, expire after 180 seconds
garbage collect after 120 seconds
the number of ripng routes:
connect ripng route 0
aggregate ripng route 0
ripng route 0
Redistribution:
The outputs of the command
show ipv6 rip
are described as follows:
Command Output
Description
port 521
Indicates that the RIPng uses UDP port 521.
6-7
SJ-20150114102049-011|2015-01-15 (R1.0)
ZTE Proprietary and Confidential
