Zte ZXR10 2900 Series, Руководство пользователя

Страница: 94 / 262

ZXR10 2900 Series User Manual
Configuring GARP/GVRP
The GARP/GVRP configuration covers the following contents.
Command Function
zte(cfg)#
set garp { enable | disable } This enables or disables
GARP function. By
default GARP is
disabled.
zte(cfg)#
set garp timer { hold | join | leave
| leaveall }< timer_value >
This sets GARP
timer.The parameter
< timer_value > takes
the fixed value 100.
zte(cfg)#
show garp This shows the
configuration of GARP.
zte(cfg)#
set gvrp { enable | disable } This enables or disables
GVRP function.
zte(cfg)#
set gvrp port < portlist >{ enable
| disable }
This enables or disables
GVRP function on port.
zte(cfg)#
set gvrp port < portlist >
registration { normal | fixed | forbidden }
This configures type of
GVRP registration on
port.
zte(cfg)#
set gvrp trunk < trunklist >{ enab
le | disable }
This enables or disables
GVRP on trunk port.
zte(cfg)#
set gvrp trunk < trunklist >
registration { normal | fixed | forbidden }
This configures GVRP
registration type on
Trunk port.
zte(cfg)#
show gvrp This views GVRP
configuration
information including if
GVRP can be enabled
and GVRP configuration
status of each port and
each Trunk port.
GARP/GVRP Configuration Example
As shown in Figure 42 , switch A connects with switch B through
port 1. By configuring GVRP, the two switches can register each
other and refresh their VLAN table.
F
IGURE
42 GVRP C
ONFIGURATION
E
XAMPLE
82 Confidential and Proprietary Information of ZTE CORPORATION