Zte ZXR10 2900 Series, Руководство пользователя

Страница: 123 / 262

Chapter 7 Service Configuration
Only the node whose attribute is master or edge-master can
be configured.
9. To set preup and preforward time on major level ring, use the
following command.
Command Function
zte(cfg)#
set zesr domain < domainId >
major-level preforward-timer
< 3-600 > preup-timer < 0-500 >
This sets preup and
preforward time
on major level
ring. By default,
preforward-timer is
3s, preup-timer is 0s.
The main-level preforward-time and preuptime must satisfy
the following condition: preforwardtime - preuptime >= 3 !
10. To set preup and preforward time on non major level ring, use
the following command.
Command Function
zte(cfg)#
set zesr domain < domainId >
level < levelid > seg < segmentid
> preforward-timer < 3-600 >
preup-timer < 0-500 >
This sets preup and
preforward time on
non major level
ring. By default,
preforward-timer is
3s, preup-timer is 0s.
For both the main level and the level of all the nodes in the zesr
domain, the preforward and preup time must be the same
11. To enable or disable ZESR function in ZESR domain, use the
following command.
Command Function
zte(cfg)#
set zesr domain < domainId
>{ enable | disable }
This enables or
disables ZESR function
in ZESR domain.
12. To set ZESR smart-link node, use the following command.
Command Function
zte(cfg)#
set zesr domain < domainId >
mode smart-link
This sets ZESR
smart-link node.
13. To set ZESR SMART-LINK access port, use the following com-
mand.
Command Function
zte(cfg)#
set zesr domain < domai
nId >{ add | delete }{ access-port |
access-trunk }< portId | trunkId >
This sets ZESR
SMART-LINK access
port.
Confidential and Proprietary Information of ZTE CORPORATION 111