Zte ZXCBTS M190T, Руководство по установке

Страница: 83 / 201

Chapter
8 Installation
of Primary Antenna Feeder System
8-15
6. Disassemble the feeder cable connector into two parts: front part and back part.
And then insert the feeder cable into the back part until it contacts the first
corrugation of the cable.
7. Insert the tube expander of the cutter into the feeder cable and then screw left
and right to expand the external copper conductor, as shown in Fig. 8.6-5.
Fig. 8.6-5 Schematic Diagram of Expanding the External Copper Conductor
8. Check if there are copper bits left in the conductor and if the conductor is
expanded evenly. Pull the back part of the connector with force to check if it is
connected firmly with the cable. If any requirement cannot be met, redo the
above steps.
9. Connect the front part with the back part, as shown in Fig. 8.6-6.
Fig. 8.6-6 Schematic Diagram of Connecting the Front Part with the Back Part of the Connector
10. Clamp the front part of the connector with a wrench and use another wrench to
clamp the back part. Twist the back part but keep the front part unmoved until
they are connected firmly.