Zte Fanfare 2, Руководство пользователя

Страница: 6 / 70

8 9
Installing a microSDHC card (not included)
The microSDHC card can be installed and removed while the phone is
powered on . Unmount the microSDHC card before removing or replacing it .
1 . Remove the back cover .
2 . Hold your microSDHC card with the metal contacts
facing down and slide it into the card slot .
Note: Some applications may require a microSDHC card
to work normally or may store certain data on it . Therefore,
it is recommended that you keep a microSDHC card installed
and not remove or replace it randomly .
3 . Press the back cover gently back into place until you hear a click .
Charging the battery
Your phone’s battery should have enough power for the phone to turn on,
find a signal, and make a few calls . You should fully charge the battery as
soon as possible .
If the battery is low, there will be a pop-up message on the screen . As you
charge your phone, the screen will tell you the exact battery level each time
you wake up your phone .
Warning! Use only ZTE-approved chargers and cables . The use
of unapproved accessories could damage your phone or
cause the battery to explode .
1 . Connect the adapter to the charging port .
2 . Connect the charger to a standard AC wall outlet . If the
phone is on, you’ll see a charging icon, such as or ,
appear in the Status Bar .
3 . Disconnect the charger when the battery is fully charged .
GETTING STARTED GETTING STARTED
Note:
If the battery is extremely low, you may be unable to power on the
phone even when it is being charged . In this case, try again after charging
the phone for at least 20 minutes . Contact customer service if you still cannot
power on the phone after prolonged charging .
Extending the battery life
Active applications, screen brightness levels, Bluetooth and Wi-Fi usage, and
GPS functionality can drain your battery . You can follow the helpful tips below
to conserve your battery power:
• Reduce the screen backlight time .
• Lower the screen brightness .
• Turn auto-sync, Wi-Fi, and
Bluetooth off when not in use .
• Disable the GPS function when not in use . Most applications using this
function will periodically query the GPS satellites for your current location;
each query drains your battery .
Powering your phone on/off
• Press and hold the Power key to power on your phone .
• To turn it off, press and hold the
Power key
to open the options menu . Tap
Power off
.
Setting up your phone for the first time
When you first power on your phone after you purchase it or reset it to factory
settings (see Settings – Device – Backup & reset ), you may need to set it up
before using it .
1 . Tap the language field to select the language you want, and tap
.
2 . Follow the prompts to set up your Wi-Fi connection, Google account,
Google services, and other options .
3 . Read the
User acceptance
, and tap
I AGREE
.