zortrax Apoller, Руководство пользователя

Страница: 7 / 62

©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection
7
Temperature class T2 Equipment operates with the use of flamma-
ble liquids of auto-ignition temperature > 300°
С [572° F].
Note: The restrictions of the liquid’s use are
included in this User Guide.
The Zortrax Apoller does not pose a threat to health and safety of people when: properly
installed and maintained, and used according to its intended purpose (following this User
Guide) or under foreseeable conditions.
Workplace Health and Safety
All maintenance activities as well as device operation require wearing neoprene safety
gloves included in the Starter Kit. Wearing safety gloves is also advised while removing the
print from the platform after the smoothing process.
Keep the workplace clean and well-lit. Disorder and lack of lighting in the workspace could
lead to accidents.
The vapors released during the smoothing process do not pose a hazard - the device
is tight. However, the room dedicated for operating the device should be properly and
regularly ventilated.
Food and beverages should be kept away from both the device and 3D printed objects.
All measures regarding health and safety provided in this User Guide as well as in separa-
te regulations should be implemented while operating the Zortrax Apoller.
The device should be configured according to its intended purpose. Improper configu-
ration may cause defective operation which may lead to damage of the device or an ac-
cident.
If the device begins to operate in an unidentified way, safely unplug it from the power
source and immediately contact the Manufacturer through the support form at:
http://
support.zortrax.com/support-form/ .
Before and during each smoothing process it is extremely important to observe all safety
rules. Do not disregard any of the rules included in the User Guide, even if you have
carried out multiple smoothing processes. Careless use of the device may cause serious
injuries in a very short time.