©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection
16
SMART VAPORT SMOOTHING (SVS)
a method of smoothing the surface of 3D printed models that uses advanced algorithms
controlling the concentration of solvent vapors, process temperature, pressure and inten-
sity of vapor circulation. SVS technology helps achieve high quality and repeatability of the
smoothing process, at the same time preserving model’s details intact.
STARTER KIT
a set of tools and protective materials useful while working with the Zortrax Apoller. Each
device is delivered with the full starter set, so that handling or maintaining the machine
becomes easier and more effective.
SUPPORT STRUCTURES
if your model has any overhanging or protruding parts, they have to be supported with
special structures so that they don’t fall down. Without these structures, the model may
lose its predesigned shape. The support is printed with the same material as the model.
Once the printing is done, it is necessary to carefully remove the support by hand or using
pliers. Before launching the smoothing process in Zortrax Apoller, support structures al-
ways have to be removed from the model.
TOUCHSCREEN
the display screen placed at the front of the device, which enables fast and intuitive navi-
gation through the menu. The screen also displays information about the current smo-
othing process and other information concerning the device.
VAPORIZATION
a process of liquid transition to vapors, which will be then atomized in the chamber, and
finally distributed on models.
Содержание Apoller
Страница 1: ...Device User Guide Apoller...
