zortrax Apoller, Руководство пользователя

Страница: 10 / 62

©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection
10
Additional Safety Information
- For smoothing processes use only dedicated solvents in a concentration above 99%
(acetone or butanone [MEK]).
- Do not block the ventilation openings. Keep the device 30 cm [12 in] from any objects
that could block the openings.
- The solvent level must not exceed the MAX mark on the solvent level indicator.
- Keep the chamber door gasket clean. Clean gasket facilitates the device’s tightness
during the smoothing process.
- The filler cap must be tightly closed. The device will detect a lack of tightness and display
a notification.
- Keep the solvent tray inside the device clean.
- The device must be placed on a stable surface, away from sources of fire and heat.
- The device can only operate at room temperature (15 - 30° C [59 - 86° F]). Otherwise, it
will not be possible to run it.
- Do not ignore notifications displayed on the screen.
- Do not pour solvent directly into the tray inside the device.
- Only 3D printed models can be placed in the chamber.
- 3D printed models can only be placed on the glass platform or suspended on the hooks
in the grid.
- All containers with solvents must be tightly closed and stored in a specially designated
place, away from children and animals.
- Smoothing process can only be carried out using models 3D printed with dedicated
thermoplastics.
- Do not smooth models that exceed the dimensions of the workspace as it may cause
device malfunction.
- Do not pull the chamber door handle when the device is running.
- The smoothing process must be configured according to the type of solvent poured
into the tank.
- The solvent tank must be filled using the specially designed set delivered with the device.
- Once the smoothing process is stopped after the solvent has been supplied to the tray,
the device begins the condensation procedure.
- Serious failures, including power supply failure, block the chamber door, making it im-
possible to open.
- It is strictly prohibited to repair the device independently.