zortrax Apoller, Руководство пользователя

Страница: 58 / 62

©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection
58
#021 TO_CHAM-
BER_UNDERHEAT
Temperature in the chamber is
too low.
Make sure that the room tem-
perature exceeds 15° C (59° F).
If the problem reoccurs, contact
Zortrax Support Center thro-
ugh the support form: https://
support.zortrax.com/support-
-form/ .
#022 TO_PELTIER_HOTSIDE Cooling system radiator has
not been cooled down in due
time. Room temperature may
be too high or cooling system
has failed.
Make sure that room tempe-
rature does not exceed 30° C
(86° F). If the problem reoccurs,
contact Zortrax Support Cen-
ter through the support form:
https://support.zortrax.com/
support-form/ .
#023 TO_PELTIER_COLDSIDE Cooling system has not been
cooled down in due time. Room
temperature may be too high or
cooling system has failed.
Make sure that room tempe-
rature does not exceed 30° C
(86° F). If the problem reoccurs,
contact Zortrax Support Cen-
ter through the support form:
https://support.zortrax.com/
support-form/ .
#025 TO_REPRESSURIZATION Pressure in the chamber has
not been compensated in due
time. Repressurization system
might have failed.
Unscrew the filler cap to re-
pressurize the chamber and
to open the chamber door. If
the problem reoccurs, contact
Zortrax Support Center thro-
ugh the support form: https://
support.zortrax.com/support-
-form/ .