©2019, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following
document are registered trademarks of Zortrax and are subject to legal protection
53
Cleaning
the door
After each smo-
othing process
or when needed
Soak a piece of cloth
in isopropyl alcohol,
acetone or butanone
(MEK), and thoroughly
clean the door. Focus
on the point of contact
between the door
and the gasket
- gloves,
- a piece of cloth,
- chemical or degre-
asing substance,
- safety glasses
Cleaning
the gasket
Before each
smoothing
process
Soak a piece of cloth
in isopropyl alcohol,
acetone or butanone
(MEK), and thoroughly
clean the gasket, direc-
ting the cloth along
the gasket’s profile.
The gasket should not
be cleaned with the
use of sharp tools.
- gloves,
- a piece of cloth,
- chemical or degre-
asing substance,
- safety glasses
Adding the
solvent
Right after
receiving a
notification
Follow the proce-
dure of adding the
solvent (
page 31
)
- gloves,
- a bottle with a tube,
- acetone or
butanone (MEK),
- safety glasses
Changing
the solvent
When needed or
once a month
Follow the procedu-
re of changing the
solvent (
page 33
)
- gloves,
- a bottle for the
remaining solvent,
- safety glasses
Cleaning the
drain tube
After each smo-
othing process
After cleaning the
solvent tank, use a
brush to clean the tip
of the drain tube to
avoid any blockage
- gloves,
- a piece of cloth,
- a brush,
- chemical or degre-
asing substance,
- safety glasses
Содержание Apoller
Страница 1: ...Device User Guide Apoller...
