Zoomlion RT35, Руководство оператора

Страница: 95 / 171

RT35 Rough Terrain Crane 07 - 3
7. 4 COLD WEATHER STARTING
If you operate the crane in very low temperature areas, the engine can be hard to start.
The optional flame starting device is very important for the normal engine start. Please
speak with the Zoomlion Service Department if you select a flame starting device for your
crane.
7. 5 MOVE AND PARK THE CRANE
Make sure that the crane has a sufficient quantity of brake pressure before you try
to move the crane. A dangerous condition occurs if the crane starts to move and
you cannot stop it.
A. Move the Crane
(1) Depress the brake pedal.
(2) Release the park brake.
(3) Move the gear selector to the “F1” position.
(4) Release the brake pedal gradually.
B. Park the Crane
(1) Gradually push the brake pedal and move the gear selector to the “F1” position.
When the crane is on the move, do not forcefully push the brake pedal, except
in a clear emergency.
(2) When the crane is at a slow speed, push the brake pedal to stop the crane.
When the crane is in the “Crab steer” or “4-wheel steer” mode, make sure that
you center the axles before you stop.
(3) Turn the park brake switch to “P” and move the gear selector to the “N” position.
(4) When it is necessary to stop the engine, operate the engine at idle speed (with no
load on the engine) for minimum of 5 minutes. This lets the engine coolant
temperature decrease gradually before the engine stops.
Note
This cool down period is very important for a crane with a turbocharged engine. This is
because the turbocharged engine makes more heat than an engine that does not
have a turbocharger.
If more data about the engine is necessary, look in the Engine Manufacturer’s Manual .
(5) Do not turn the ignition switch to “0” at this time. Stop the engine and keep
Caution
Caution
Warning