Zoomlion RT35, Руководство оператора

Страница: 140 / 171

07 - 48 RT35 Rough Terrain Crane
7. 19 VEHICULAR OPERATION
A. The Rough Terrain Crane can move off-road and a short distance of on-road travel.
B. Before you move the crane, think about the distance and type of terrain that you must
move on. Plan your moves carefully to prevent all dangerous conditions.
C. Pre-Move Checklist
(1) Before you move the crane to and from the job-site, make sure that you do the
safety items that follow:
Set the park brake. Always put chocks before and behind the wheels
when you park on a slope.
(a) Engage the swing lock.
Do not move the anti-two block weight when it is near the head of the
crane. You can cause damage to the boom head, rooster sheave and
anti-two block switch.
(b) Attach the hook block to the front of the crane. If you cannot do this, align the
anti-two block weight 1” (30 mm) from the boom head by applying the
by-pass key switch. The crane can be damaged if you let the anti-two block
weight move side-to-side when you move the crane.
(c) Make sure that the outriggers are fully retracted and the retaining pins are
installed.
(d) When you move the crane more than 2 mi. (3.22 km), make sure that the
main pump and PTO is disengaged.
(e) If necessary, put the transmission into the High-speed range (2-wheel drive
mode).
(f) Make sure that the tire pressure is correct.
(g) Before you move the crane, adjust the seat and mirrors.
Do not move the crane if the transmission oil pressure is less than 250
psi (17.2 bar). You can cause damage to the transmission.
(h) Make sure that the transmission oil pressure (250 to 300 psi (17.2 to 20.7
bar)) and oil temperature 82.2° C to 93.3° C (179.9 to 199.4
°
F) are in the
correct range.
Caution
Caution
Caution