Zoomlion RT35, Руководство оператора

Страница: 141 / 171

RT35 Rough Terrain Crane 07 - 49
D. Moving the Crane to a Job-Site
(1) Do the items that follow before you move the crane:
(a) Start the engine.
(b) Idle the engine for a short interval to let the air pressure increase to the
correct level.
(c) Engage the swing lock.
(d) Apply the service brake.
(e) Release the park brake.
(f) Move the gear selector to the “F1” position.
Note
Make sure that you use the correct transmission gear when you move on
rough terrain.
(2) The crane operates in the “off-road” conditions. If necessary, you can move the
crane on general roadways according to the related regulations. The crane must
hold the items that follow:


Lights


Flares


Flags


Safety equipment
When you move the crane on hard surfaces, shift the transmission to
High-speed range. If not, the crane can be damaged.
When you move the crane, make sure that you are in the correct gear
for the type of travel. When you use the incorrect gear, you put too
much load on the crane. When the oil temperature is more than 121.1° C
(250.3
°
F), stop the crane immediately. To decrease the temperature:
move the gear selector to the “N” position. Operate the engine at an
RPM range between 1000 to 1200 rpm. The oil temperature decreases in
a short interval of time immediately. If it does not, you must examine the
crane for a different malfunction.
DO NOT stop the engine at this time.
Do not move the gear selector between forward and reverse when the
crane is in motion.
Caution
Caution
Caution