Zoomlion RT35, Руководство оператора

Страница: 121 / 171

RT35 Rough Terrain Crane 07 - 29
C. Swing Lockout Device
The swing lockout device attaches on the right side of the turntable. It can lock the
turntable in the 360° range. You use the swing lock switch (on the cab dash panel) to
engage or disengage the swing lockout device.
When the swing lock switch is in the LOCK position, the superstructure cannot move
left or right.
Figure 07 – 24 Swing Lock Switch
 Make sure that you do not make fast movements or suddenly stop
the turn.
 When you operate a new crane, make sure that you do a check of
the "Maintenance Log". The swing bearing bolts must be examined
at these intervals: 100, 500, 1000 hours of operation.

The torque on the bolts must be 1106 lbf·ft (1500 N·m).
 The crane can turn with a load above the ground. Do not try to lift
the load diagonally. Do not pull a load across the ground.
 Make sure that the outriggers are in the correct position and RCI is
set to the proper configuration before you swing the superstructure
with a load on the boom.

Monitor the area as you move a load. Do not move a load unless the
conditions are safe.

Before you swing the superstructure, make sure that the swing
lockout device is in the "UNLOCK" position. When the crane
movements stop, lock the superstructure and ensure the swing
lock indicator illuminates.
Before you lift and move a load, make sure that the wind and weather
conditions are safe to operate.
Danger
Caution