Zonet ZPS1000, Руководство пользователя

Страница: 54 / 73

b. Do you wish to change the printer description file /etc/printcap (y/n) [n] ? --------->
y
c. Enter information for remote printers or local printers accepting remote printing
requests
Please enter the printer name (q to quit): ---> printer-1
You can enter a printer name you like in this option.
d. Is xxxx a remote printer or a local printer (r/l) ---------> r
e. Please enter the name of the remote host that xxxx is attached to: --------->
the
Print server‘s IP address you specified in Step 2, for example, 192.72.214.103
Note: You can add the host name associated with the IP address in the /etc/hosts file. If you
have done this, please use the host name instead of the IP address.
f. Printer xxxx is connected to host 192.72.214.103
Is this correct? (y/n) ---------> y
g. After it shows some messages, it will ask you a question.
If you‘re not sure, answer ‘n’? (y/n) [n] --------> n
h. Would you like this to be the system default printer? (y/n) [n]-------> answer this
question if you like to make it as a default printer.
i. Do you want to install or remove printing (i/r/q)? [q] : -------> q
j. Do you want to star remote daemon now (y/n) --------> y
11.
Done. Submit print jobs by using “lp” or “lpr” command.
For example: lp -d printer-1 /etc/printcap
SUN Solaris 2.x
1. Login root
2. Type “arp -s <IP address> < Print server‘s node ID>”
The node ID can be found from the white label on the backside of the Print Server. For
example:
arp -s 192.72.214.103 00:40:01:05:01:8c
3. Type “ping < Print server‘s IP address>”
For example:
ping 192.72.214.103
(You should get the responses from the Print Server).
4. Type “tftp < Print server‘s IP address>”
For example: tftp 192.72.214.103
At the tftp prompt, type “
get config.txt ” to get the Print Server‘s configuration file.
For example: tftp > get config.txt
54