6. Network Print Monitor
Preparation
The print server supports
TCP/IP
,
IPX/SPX
and
NetBEUI
protocols under MS-Windows.
Please make sure that the following steps have been completed before proceeding with
installation under Windows PC.
Select A Desired Protocol
TCP/IP
The TCP/IP Protocol must be installed. For further information, please read “
TCP/IP
Protocol Installation”
section in this chapter.
Note:
If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print
server” section later in this chapter.
IPX/SPX
The IPX/SPX-compatible Protocol must be installed. For further information, please read
“
IPX/SPX-compatible Protocol Installation”
section in this chapter.
NetBEUI
The NetBEUI protocol must be installed. For further information, please read “
NetBEUI
Protocol Installation”
section in this chapter.
TCP/IP Protocol Installation
1. Click
Start
, point to
Settings
and select
Control Panel
.
2. Double click the
Network
icon.
3. If
the
TCP/IP
Protocol
is not already installed, click
Add
.
4. Select
Protocol
and click
Add
.
5. Select
Microsoft
from the Manufacturers list.
6. Select
TCP/IP
Protocol
from the Network Protocols list.
43
Содержание ZPS1000
