9
Notes:
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
Operation:
Wireless Remote (9300xi only)
The 9300xi has a wireless
remote feature that allows
you to move the cleaner into
specific sections of the pool.
1- Turn on the cycle of choice on the power pack.
2- While cleaner is moving, point the remote at the power pack, and press
the direction of choice on the remote. Continue holding the button down until
the cleaner has completed the movement you want. While the remote
buttons are pressed the two lights on either side of the timer button, ,will
blink.
3- The cleaner will resume its cycle after 45 seconds if the remote is not
used.
Notes:
- The Wireless Remote for 9300xi is always enabled for use while either cycle on
the power pack is activated.
- The Remotes each have a unique ID at 433.92MHZ. Because of this, if a remote
is replaced, it must be synchronized with the power pack.
(See Troubleshooting).
- The replacement battery is
L1028 (12V 23A)
OPERATION
