31
TROUBLESHOOTING
Notes:
_____________________________________________________________________
_____________________________________________________________________
_____________________________________________________________________
Troubleshooting:
Wireless Remote (9300xi only)
Confirm the remote is synchronized with the Power Pack:
1- Connect the 9300xi sport to the power pack, then plug the power pack to
the GFCI receptacle.
2- Press the power, , & the Cycle I buttons together for more than 6
seconds until both lights on either side of the timer, , button flash once.
3- Press and hold the “rotate right” button on the remote control unit.
4- The light on the right of the timer button, ,will flash 5 times then both
lights on either side of the timer button, , will flash together.
5- The synchronization procedure is now completed when both lights switch
off.
Notes:
-The Remotes each have a unique ID at 433.92MHZ. Because of this, if a
remote is replaced, it must be synchronized with the power pack.
- The replacement battery is
L1028 (12V 23A)
