24
Assembly:
Replacing the Motor Block
4- Insure the back of the
motor block properly
seated to prevent
propeller damage.
5- Replace the 4 screws
in the motor block.
A gap here means motor block is not
seated & propeller will rub housing.
Properly seated into housing
Assembly:
Replacing the Motor Block
1- Press the o-ring into
the groove of the cable
socket and plug into the
motor block.
2- Screw the cable socket
into the motor block
evenly with the 2 screws
to create a good seal.
3- Feed the excess cable
into the wheel well and
lower the motor block into
place.
3
1
2
ASSEMBLY
