23
Assembly:
Replacing Floating Cable in
the Cleaner Housing
1- Lay the cable into the
top of the main housing
and wedge the clamp into
the notch and seat the
cable anchor.
2-Replace the screw at
the cable tie
Note: Replacement Cable comes
complete with plug, cable ties
and cable anchor.
ASSEMBLY
Assembly:
Assembling the Housing
1- Set the top housing on
a workbench upside
down.
2- Guide the floating
cable through the motor
block opening of the
bottom housing.
3- Seat the bottom and
top housing together and
replace the 6 screws.
(When using a motorized
screwdriver, engage screw first
and use a low torque to prevent
cross threading and stripping).
4- Replace brushes by
sliding tabs through the
slots.
