22
Assembly:
Replacing the Rollers and
Roller Bushings
1- Reconnect the rollers
and bushings.
2- Put both rollers onto
the brush separator and
insert into the housing.
3- Screw in the single
screw holding the brush
separator to the housing.
4- Insert the small roller
transmission gear
through the housing into
the rollers.
5- Holding the small roller
transmission gear, screw
the gear to the rollers.
Assembly:
Replacing the Wheels
Align keys
into grooves
on housing
Grooves in
Housing
• IMPORTANT: Insure
that the 3 keys of the
bushing are aligned with
the 3 grooves in the
housing. If the wheel is
replaced without aligning
the keys, the wheel can
not be removed in the
future. Push the wheel
into the housing until it
locks into place.
ASSEMBLY