Zmorph FAB, Руководство пользователя

Страница: 67 / 169

Product Manual - ZMORPH FAB back to table of content >>
67
Tap the upper arrow with LEFT
description on the screen
to remove 80 mm of the
filament. At first, the extruder
will load 40 mm to prevent
clogging. Repeat if needed.
Tap the upper arrow with RIGHT
description on the screen to
remove 80 mm of the filament.
At first, the extruder will load 40
mm to prevent clogging.
Repeat if needed.
Insert a new filament gently
into the guide.
Tap the bottom arrow on the
screen to feed 80 mm of the
filament. Choose down arrow
with LEFT description to do
that.
Push the filament down until
you feel it has been grabbed
by the extruder
Wait until the material flows
out of the nozzle. Tap the
feed button again
if necessary
Repeat the last 4 steps for
down arrow with RIGHT
description.
Remove the extruded material.
Choose ‘DONE’ and wait until
the extruder starts printing
again.
LEFT RIGHT ALL
LOAD/UNLOAD TEMPERATURES
DONE
LEFT RIGHT ALL
LOAD/UNLOAD TEMPERATURES
DONE
LEFT RIGHT ALL
LOAD/UNLOAD TEMPERATURES
DONE
LEFT RIGHT ALL
LOAD/UNLOAD TEMPERATURES
DONE
LEFT RIGHT ALL
LOAD/UNLOAD TEMPERATURES
DONE
Sometimes after clicking ‘DONE’ the machine won’t resume the work, in those cases repeat the
feeding by pressing one more time the ‘LEFT’ down button and after the extruder stops the feeding
process press the ‘DONE’ button.
3D printing workflow
NOTE
80mm 80mm 80mm
80mm 80mm 80mm
80mm 80mm 80mm 80mm 80mm 80mm
80mm 80mm 80mm