Zmorph FAB, Руководство пользователя

Страница: 64 / 169

Product Manual - ZMORPH FAB back to table of content >>
64
Tap the upper arrow on the
screen to remove 80 mm of
the filament. At first, extruder
will load 40 mm to prevent
clogging. Repeat if needed
Insert the new filament gently
into the guide.
Tap the bottom ‘LEFT’ arrow
on the screen if necessary to
manualy feed the filament.
Push the filament down until
you feel it has been grabbed by
the extruder drive gear.
Wait until the material flows
out of the nozzle. Tap the feed
button again if necessary.
Remove the extruded
material. Click ‘DONE’, the
extruder will continue to
work from where it stopped.
LOAD/UNLOAD
LEFT RIGHT ALL
TEMPERATURES
DONE
LOAD/UNLOAD
LEFT RIGHT ALL
TEMPERATURES
DONE
LOAD/UNLOAD
LEFT RIGHT ALL
TEMPERATURES
DONE
3D printing workflow
Sometimes after clicking ‘DONE’ the machine won’t resume the work, in those cases repeat the
feeding by pressing one more time the ‘LEFT’ down button and after the extruder stops the feeding
process press the ‘DONE’ button.
NOTE
80mm 80mm 80mm 80mm 80mm 80mm
80mm 80mm 80mm