Zmorph FAB, Руководство пользователя

Страница: 141 / 169

Product Manual - ZMORPH FAB back to table of content >>
141
14.5 Laser engraving/cutting file starting (with calibration)
After uploading the file to an internal card or inserting an external SD card with the prepared file:
Enter the ‘NEW JOB’ menu. Go to the ‘CHOOSE FILE’
section. Files uploaded to the internal
SD card are located in the
‘INTERNAL’ tab, files uploaded
to the SD card are located in
the ‘EXTERNAL’ tab.
Select the prepared G-code
file.
If the prepared file or folder
is not visible on the list press
the up/ down arrow buttons
to navigate through the file
list.
Exiting the folder is done by
selecting the folder icon.
NOTE
If the user inserts the external SD card, the screen should jump forward to the ‘CHOOSE FILE’
section screen on the ‘EXTERNAL’ directory.
If there was no previously chosen file, after pressing on the ‘ NEW JOB’ menu the screen will go
directly to the ‘CHOOSE FILE’ section.
Laser workflow
NEW JOB MAINTENANCE
CHOOSE
FILE
PREHEAT
PRINTER
MOVE
BED
SETTINGS
START BACK CANCEL NEXT
EXTERNAL INTERNAL
example.gcode
CANCEL NEXT
EXTERNAL INTERNAL
CANCEL NEXT
EXTERNAL INTERNAL
CANCEL NEXT
EXTERNAL INTERNAL
example.gcode example.gcode example.gcode