Product Manual - ZMORPH FAB
94
The software will separate the imported models allowing to set individual parameters for both of them. To
assign filaments (left/right) to the models, right mouse click on a chosen model, go to Materials menu, and
choose pink or blue color. The colors have their counterparts in main menu toolbar. After defining two different
materials, the software will create an artifact that clears the nozzle from the filament.
3D printing workflow
Quality
- is a simplified option to select model quality settings, allowing you to select the layer height and
path width with a single slider. HQ guarantees the highest quality, at the expense of the print speed (lasts
longer), while FAST guarantees a faster printout, at the expense of a larger layer, and thus lower quality.
Recommended settings of 50% guarantee the best quality to print speed ratio. The current path values and
layer height are shown under the basic menu. Quality can also be defined separately for different models,
editing takes place in the local menu.
