Zmorph FAB, Руководство пользователя

Страница: 65 / 169

Product Manual - ZMORPH FAB back to table of content >>
65
3D printing workflow
12.6 Automatic detection of missing filament
Single Extruder Toolhead 1.75 is equipped with filament sensor, which allows to detect missing filament
during the print. This function will pause the print when the filament ends. After replacing the filament with
a new one, the print will be resumed from the paused moment.
When the extruder runs out
of the filament during printing
the Zmorph Fab automatically
start the filament change
procedure.
Remove the leftover material. The extruder will cool down
automatically. Set the correct
extruder temperature and go
to the ‘LOAD/UNLOAD’ menu.
Tap the ‘LOAD/UNLOAD’ menu
and wait until the extruder
reach the proper temperature. Insert a new filament gently
into the guide.
The extruder will
automatically start feeding
the filament
Wait until the material flows
out of the nozzle.
Tap the feed button if
necessary Remove the extruded
material. Click ‘DONE’, the
extruder will continue to work
from where it stopped.
LOAD/UNLOAD TEMPERATURES
DONE
TARGET
LEFT
RIGHT
BED
CURRENT
LOAD/UNLOAD
LEFT RIGHT ALL
TEMPERATURES
DONE
LOAD/UNLOAD TEMPERATURES
DONE
TARGET
LEFT
RIGHT
BED
CURRENT
LOAD/UNLOAD
LEFT RIGHT ALL
TEMPERATURES
DONE
The material is runnig out.
Preparing for filament change
Please remove leftover material
Please wait,
loading material
80mm 80mm 80mm 80mm 80mm 80mm
0
0
60
23
0
60
200
0
60
40
0
60